E sa keneleng metsi ptfe membrane vent self adhesive filter venting membrane

Tlhaloso ea Sehlahisoa

Filimi e sa keneleng metsi le e phefumolohang
Tlhaloso
M.PN	WEP	Phallo ea moea@70mbar		Botenya mm	Mmala	Oleophobia		Boemo ba IP	Mocheso
SR132	10 psi	4000-5000ml/min/cm²		0.12-0.14	Bosoeu			IP67/IP68	-40 ~ 125 ℃
SR135	14.5 psi	3500-4000ml/min/cm²		0.12-0.15	Bosoeu			IP67/IP68	-40 ~ 125 ℃
SR450	21 psi	1000-2000ml/min/cm²		0.15-0.2	Bosoeu			IP68	-40 ~ 125 ℃
SR452	14.5 psi	1000-2000ml/min/cm²		0.12-0.16	Bosoeu			IP67/IP68	-40 ~ 125 ℃
SR455	21 psi	800-1300ml/min/cm²		0.15-0.2	Bosoeu	6		IP68/IP69K	-40 ~ 125 ℃
SR457	14.5 psi	1300-1600ml/min/cm²		0.15-0.2	Bosoeu	7		IP67/IP68	-40 ~ 125 ℃
SR458	29 psi	1000-1700ml/min/cm²		0.17-0.22	Bosoeu			IP67/IP68	-40 ~ 125 ℃
SW001W/B	43.5 psi	200-300ml/min/cm²		0.15-0.2	WT/GY			IP67/IP68	-100 ~ 250 ℃
SW002	58psi	100-200ml/min/cm²		0.25-0.3	Hlooho	6		IP67/IP68	-100 ~ 250 ℃
SD221	80psi	800-1000ml/min/cm²		0.15-0.2	Bosoeu			IP67/IP68	-40 ~ 125 ℃
Shoa Cut	litšiea	Mela	Bophara ba Mokhanni:mm	Nomoro ea Karolo
OD*ID				Letoto la SR		Letoto la SD		Letoto la SP	Letoto la SW
2.8*1.0	10	20	50
7.5*3.0	8	20	80
8.0*3.0	8	20	80
10.2 * 5.5	5	10	60
12.0*5.0	5	10	70
12.5 * 5.0	6	10	75
13.0*6.0	6	10	75
14.0*7.0	5	10	75
16.0*8.0	4	10	80
18.0*10.0	4	10	80
19.1*8.9	4	10	85
20.0*10.0	4	10	90
22.0*12.0	4	10	100
29.0*20.0	3	10	95
35.0*20.0	2	10	75
40.0 * 19.5	5	10	120

Likarolo tsa Sehlahisoa le molemo

1.E thibela metsi ebile e ka Phefumoloha:Lera la ePTFE le kopanya thepa e ikhethang ea ho se kenelle metsi le ho phefumoloha.E etsa mokoallo o ke keng oa phunyeletsoa khahlanong le metsi ha o ntse o lumella ho feta ha mongobo le moea, ho netefatsa tšireletso e babatsehang ntle le ho senya ts'ebetso.

2.Pressure Differential Balance:Lera le boloka phapang ea khatello e leka-lekaneng lipakeng tsa tikoloho ea kahare le kantle ea lisebelisoa tsa elektroniki.Sena se thibela ho kena ha metsi le litšila tse ling ha ho ntse ho netefatsa hore khatello ea ka hare e lekana ka ho lekaneng.

3.Chemical Corrosion Resistance:Lera la ePTFE le fana ka khanyetso e ikhethang ea ho bola ha lik'hemik'hale, ho sireletsa likarolo tsa elektronike tse nang le kutlo ho tsoa liphellong tse senyang tsa lik'hemik'hale le li-solvents tse atisang ho kopana le liindasteri tse sa tšoaneng.

4.Ho hanyetsa mocheso o phahameng:E etselitsoe ho mamella mocheso o phahameng, lesela la ePTFE le sireletsa lisebelisoa tsa elektronike ho tsoa tšenyo e amanang le mocheso.E sebetsa e le thibelo e sebetsang ea mocheso, ho boloka botšepehi ba sesebelisoa esita le tlas'a maemo a feteletseng a ho sebetsa.

Tšireletso ea 5.UV:Ka thepa ea eona ea ho thibela UV, membrane ea ePTFE e sireletsa lisebelisoa tsa elektronike liphellong tse kotsi tsa mahlaseli a letsatsi.Sena se thibela ho senyeha, ho ba mosehla, le ho senyeha ha ts'ebetso, ho netefatsa hore lisebelisoa li sebetsa ka nako e telele.

6. Ho hanana le Lerōle le Oli:Lera la ePTFE le thibela ka katleho likaroloana tsa lerōle le ho leleka oli, ho matlafatsa nako e telele le ho tšepahala ha lisebelisoa tsa elektronike, haholo-holo libakeng tse atisang ho bokella lerōle kapa tšilafalo ea oli.

Lisebelisoa tsa Sehlahisoa

Lera la ePTFE le sa keneleng metsi le thibelang metsi le fana ka lits'ebetso tse fapaneng, ho kenyelletsa:

1.Lihlahisoa tsa molumo tse sa keneleng metsi le tse phefumolohang:Netefatsa hore li-headphone, li-microphone, le libui li sebetsa hantle ka ho fetisisa ka ho li sireletsa khahlanong le metsi, mongobo le lerole.

2.Indasteri ea elektroniki:Sireletsa li-sensor, lisebelisoa tse ka tlas'a metsi, le lisebelisoa tsa tlhahlobo ho tsoa metsing, lik'hemik'hale, mocheso o phahameng le litšila tsa tikoloho.

3.Indasteri ea likoloi:Sireletsa mabone a likoloi, likarolo tsa ECU, le lisebelisoa tsa puisano ho tsoa metsing, lerōleng, mahlaseling a kotsi a UV, le ho kenella ha oli.

4.Lihlahisoa tsa ka ntle:Ntlafatsa ho tšoarella le ho ts'epahala ha lisebelisoa tsa mabone a kantle, lioache tsa lipapali, le lisebelisoa tse ling tsa kantle tsa elektroniki ka ho li sireletsa metsing, leroleng le oli.